2015-2020 Yamaha R1 221-225lbs Rider Suspension Settings

FrontRear
Preload17 Turns In6 Turns In
Compression6 Turns OutHigh Speed – 1.5 Turns Out/Low Speed – 4.5 Turns Out
Rebound3 Clicks Out13 Clicks Out
Tire Pressure32.5 PSI32.5 PSI

Preload Adjustment – Front

  • Rotate preload adjustor counter clockwise until it rest softly against its full out position

  • Rotate Clockwise the number of turns stated above

Compression Adjustment – Front

  • Slowly rotate compression adjuster clockwise until it softly stops against its full in position

  • Rotate counter-clockwise the number of clicks stated above

Rebound Adjustment – Front

  • Slowly rotate rebound adjuster clockwise until it softly rest against its full in position

  • Rotate counter-clockwise the number of clicks stated above

Preload Adjustment – Rear

  • Loosen top spanner nut until bottom spanner nut is free to rotate
  • Adjust bottom spanner nut until the number of threads seen above the nut match the number of turns stated above
  • Once bottom spanner nut is adjusted, rotate the top spanner nut down until it is snug with the bottom spanner nut

Compression Adjustment (High Speed) – Rear

  • Slowly rotate clockwise the outer high speed compression adjuster with a 12mm socket until it softly stops at its full in position

  • Rotate counter-clockwise with a 12mm socket the number of clicks stated above

Compression Adjustment (Low Speed) – Rear

  • Slowly rotate in the inner low speed compression adjuster with a 4mm hex key until it softly stops at its full-in position

  • Rotate counter-clockwise with 4mm hex key the number of clicks stated above

Rebound Adjustment – Rear

  • Slowly rotate clockwise the rebound adjuster with a 4mm hex key until it softly stops at its full-in position

  • Rotate counterclockwise the rebound adjuster with 4mm hex key the number of clicks stated above